+1 414-354-8050

Protective Cover Adjusting Screw   SB 073.1

Service Bulletin: SB 073.1

Subject: Protective Cover Adjusting Screw


When removing the glue stencil/manifold assembly, there is the possibility of striking the top of the threaded adjusting screws on the blank transfer turret gripper assembly. This can cause damage to the face of the stencil and its adhesive slots or holes.

To minimize this problem a plastic cover cap can be placed over the top of the adjusting screws. Sample sets are being given to each customer having a glue seal machine for evaluation. Additional pieces can be ordered as:

50 pieces of Cap #A37-8