Cam Follower Replacement   SB 126.1

Service Bulletin: SB 126.1

Subject: Cam Follower Replacement

Recommendations: 

All the cam followers on the machine should be inspected and measured, if necessary, for possible replacement. Replace any of them when they measure 0.002″ undersize. The cam followers on the folding wing activators should be replaced every 2000 hours and inspected during that duration for excessive wear. The cam followers being replaced most frequently per machine are listed below.

PMC-750 & GX-1000
Mandrel Turret – BR-15200 (CF-2-B-6)
Rimming Turret – BR-15180 (CF-1-3/4-B-5)
Transfer Turret – BR-15310 (CFH-1-3/4-B-5)
Folding Wing Activator – BR-15180 (CF-1-3/4-B-5)
Cam Follower Adaptor – BR-15290 (CFH-1-1/2-B-3)

PMC-1000
Mandrel Turret – BR-15200 (CF-2-B-6)
Rimming Turret – BR-15140 (CF-1-1/2-B-7)
Transfer Turret – BR-15310 (CFH-1-3/4-B-5)
Top Curl Drive – BR-15240 (CF-2492)
Folding Wing Activator(*) – BR-15310 (CFH-1-3/4-B-5)
*For Older Machines – BR-15180 (CF-1-3/4-B-5)
Cam Follower Adaptor – BR-15290 (CFH-1-1/2-B-3)

PMC-1250
Mandrel Turret – BR-15230 (CF-2-1/2-B-5)
Rimming Turret – BR-15230 (CF-2-1/2-B-5)
Transfer Turret – BR-15310 (CFH-1-3/4-B-5)
Folding Wing Activator(*) – BR-15310 (CFH-1-3/4-B-5)
*For Older Machines – BR-15180 (CF-1-3/4-B-5)
Cam Follower Adaptor – BR-15290 (CFH-1-1/2-B-3)

PMC-1500 & PMC-1501
Mandrel, Rimming & Transfer Turret – BR-15200 (CF-2-B-6)
Folding Wing Activator(*) – BR-15310 (CFH-1-3/4-B-5)
*For Older Machines – BR-15180 (CF-1-3/4-B-5)
Cam Follower Adaptor – BR-15290 (CFH-1-1/2-B-3)