Service Bulletin: SB 127.1
Subject: Pocket Wrench Set
The 40834-B adjusting wrench has been replaced by the 202-942 adjusting wrench and the HW-10180 “T” handle wrench has been replaced by the 202-943 “T” handle wrench. The new part number wrenches have been made to a twelve (12) inch length replacing the original nine (9) inch length.
These wrench sets will apply to the PMC-750, PMC-1250, and the GX-1000 rimming turrets. They will become standard on all future machines and will be available from the parts department for current operating machines.