- Home
- About Us
- Machines
- Cups & Containers
- Support
- Contact Us
- Customer Portal
Service Bulletin: SB 040.1
Subject: Sidewall Stock Rollstand — Hydraulic Pump
Recommendations:
All PMC cup machines using a single ENERPAC P-51 hydraulic pump to position the sidewall stock roll stand have at times developed a minute loss of pressure causing the stand to lower its set position.
This can be readily corrected by installing a ball check valve Apollo #73-101 and two 1/4 NPT close pipe nipples into the pump’s inlet line.
All required parts are available from PMC if not locally obtainable.
Reference this Service Bulletin on your order.