+1 414-354-8050

Lubrication — In-line Printers   SB 045.1

Service Bulletin: SB 045.1

Subject: Lubrication — In-line Printers

Recommendations: 

The following schedule of lubrication is recommended for all PMC in-line printing presses. Item one relates only to models with the automatic cylinder throw off feature. Items two and three apply to each color deck.

IN-LINE PRINTER LUBRICATION SCHEDULE

OPERATING HOURS LOCATION & LUBRICATION SPECIFICATION
150 Hours Power throw-off models only: Pump Shell Alvania EP2 grease (or equiv.) into tubes protruding from anilox roll shafts
1500 Hours Check oil level in gearbox of idler motor. Fill to level of lower oil level plug if required with Shell Delima 71 (or equiv.)
6000 Hours Repack needle bearings on cylinder shafts with Shell Alvania EP 2 grease (or equiv.).Repack bearings in idler motors with Shell Alvania EP2 grease (or equiv.)