Machine Speed Cycle Counter   SB 117.1

Service Bulletin: SB 117.1

Subject: Machine Speed Cycle Counter

Recommendations: 

To assist in obtaining the cycle speed of the machine, a Proximity Switch can be mounted in back of the bottom stock Segment Roll gears. The switch reads the one to one ratio of these gears as related to machine speed.

On the main console a digital meter is installed which gives a direct read-out of revolutions per minute of the machine. A Bracket is supplied to be attached to the side of the bottom feeder to hold the Proximity Switch.

All parts required for this feature, including installation instructions can be supplied.